HP 1652B Programming Reference Manual page 347

SOURce
SOURce
Command Syntax:
where:
Example:
Query Syntax:
Returned Format:
Example:
27-14
The SOURce command specifies the source to be used for subsequent
measurements. If the source is not specified, the last waveform source is
assumed.
The query returns the presently specified channel.
:SCOPe:MEASure:SOUR
::= {l 12)
OUTPUT XXX;":SCOPE:MEASlJRE:SOURCE
: S C O P e : M E A S u r e : S O U R c e ?
10 DIM so$[loo]
20 OUTPUT XXX;" :SCOPE:MEASURE:SOURCE?"
3 0 E N T E R XXX;So$
40 PRINT So$
50 END
command/query
HP 16528/1663B
Programming Reference