ACCumulate
ACCumulate
Command Syntax:
where:
Example:
Query Syntax:
Returned Format:
Example: 10 DIM P$ [iool
The Accumulate command allows you to control whether the chart
display gets erased between each individual run or whether subsequent
waveforms are allowed to
The ACCumulate query returns the current setting. The query always
shows the setting as the character "0" (off) or "1" (on).
: : = {OIOFF} o r (1 ( O N )
OUTPUT XXX;":MACHINEl:TWAVEFORM:ACCUMULATE
20 OUTPUT XXX;":MACHINEl:TWAVEFORM:ACCUMULATE?"
30 ENTER XXX; P$
4 0 P R I N T P$
be
displayed over the previous ones.
ON"
command/query
HP 16528/1663B