Prestore - HP 1652B Programming Reference Manual

PREStore

PREStore
Command Syntax:
where:
< a n d - t e r m 1 >
12-10
The PREStore command turns the prestore feature on and off. It also
defines the qualifier required to prestore only selected states. The terms
A through H are defmed by the TERM command. The meaning of
Expressions are limited to what you could manually enter through the
Format menu. Regarding parentheses, the syntax definitions below show
only the required ones. Additional parentheses are allowed as long as the
meaning of the expression is not changed.
A detailed example is provided in figure 12-2.
The PREStore query returns the current prestore specification.
1 IP}:STRace:PREStore
:: = { ANYState
( -z e x p r e s s i o n 1 z [ { A N D I OR} -z e x p r e s s i o n 2 z 1) I
:: = { <or-term1 > I <and-term1 z I cor_term2>
:: = { <or-term1 > [OR <or-term1 >I... I <and-term1 > [AND <and-term1 >I...}
::= { -zor_term2>[OR
: : = {AIB~C~DIINRange~OUTRange}
: : = (NOTAl N O T B I NOTC I NOTD)
: : = (EIFIGIH}
: : = {NOTE(NOTF(NOTG(NOTH]
command/query
{OFF 1 < prestore-qualifier > }