Data - HP 1652B Programming Reference Manual

DATA

DATA
Command Syntax:
where:
Subsystem
166
The DATA command allows you to edit the compare listing image for a
given label and state row. When DATA is sent to an instrument where
compare image is defmed (such as at power-up) all other data in the
image is set to don't cares.
Not specifying the -z label-name > parameter allows you to write data
patterns to more than one label for the given line number. The first
pattern is placed in the left-most label, with the following patterns being
placed in a left-to-right fashion (as seen on the Compare display).
Specifying more patterns than there are labels simply results in the extra
patterns being ignored.
Because don't cares (Xs) are atlowed in the data pattern, it must always
be expressed as a string. You may still use different bases, though don't
cares cannot be used in a decimal number.
The DATA query returns the value of the compare listing image for a
given label and state row.
:: = a string of up 6 alphanumeric characters
:: = integer from -1023 to + 1023
:: = "{#El{OI 1 IX} . . . I
OUTPUT XXX:" :MACHINEZ:COMPARE:DATA
OUTPUT XXX;":MACHINE2:COMPARE:DATA
OUTPUT XXX;":MACHINEl:CDMPARE:DATA
OUTPUT XXX;":MACH2:COMPARE:DATA
command/query
. /
'CLOCK', 42, 'XBDllXlOlX'"
0, 'XHFF40"
129, 'XBXXOO'. '#BllOl', 'YBlOXX'"
-511, '4', '64',
Programming Reference
HP 16628116638