XCONdition
XCONdition
Command Syntax:
Example:
Query Syntax:
Format:
Example: 10 DIM XcS
IS-24
The XCONdition command specifies where the X marker is placed. The
X marker can be placed on the entry or exit point of the XPATtem when
in the PATTern marker mode.
The XCONdition query returns the current setting.
OUTPUT XXX; ":MACHINE1:TWAVEFORM:XCONDITION
1 12):TWAVeform:XCONdition?
20 OUTPUT XXX;" :MACHINE1:TWAVEFORM:XCONDITION?"
30 ENTER XXX; Xc$
PRINT Xc$
40
END
50
command/query
ENTERING"
HP 1652B/l653B
Programming Reference