Record - HP 1652B Programming Reference Manual

RECord

Command Syntax:
Example:
Query Syntax:
Returned Format:
Example:
HP 1652Bll653B
Programming Reference
The RECord command specifies the data you want to receive over the
bus. The choices are FULL or WINDOW. When FULL is chosen the
entire 2048 point record of the specified channel is transmitted over the
bus. In WINDOW mode, only the data displayed on screen will be
returned. Use the SOURce command to select the channel of interest.
The query returns the present mode chosen.
OUTPUT XXX;":SCOPE:WAV:SOUR
: S C O P e : W A V e f o r m : R E C o r d ?
[:SCOPe:WAVeform:RECord] {FULLIWINDow}
20 OUTPUT XXX;":SCOPE:WAVEFORM:SOURCE
30 ENTER XXX;Wr$
40 PRINT Wr$
50 END
RECord
command/query
FULL"
2813