Connecting The Hp E3491A Pentium Probe To A Power Source; To Choose A Power Cord - HP E3491A Installation And Service Manual

Connecting the HP E3491A Pentium Probe to a
Power Source
The HP E3491A Pentium Probe does not have an On/Off switch. To
turn the HP E3491A Pentium Probe on or off, plug or unplug it from
the power supply.

To choose a power cord

The HP E3491A Pentium Probe is shipped from the factory with a power
supply and cord appropriate for your country. If the cord you received is not
appropriate for your electrical power outlet type, contact your
Hewlett-Packard sales and service office.
Use only the supplied HP power supply and cord.
W a r n i n g
Failure to use the proper power supply could result in electric shock.
C a u t i o n Use only the supplied HP power supply and cord.
Failure to use the proper power supply could result in equipment damage.
6