Table of Contents
Advertisement
The OPATtem command allows you to construct a pattern recognizer
term for the 0 marker which is then used with the OSEarch criteria and
deals with only one label at a time, a complete specification could require
several invocations.
When the value of a pattern is expressed in binary, it represents the bit
values for the label inside the pattern reco @zer term. In whatever base
is used, the value must be between 0 and 2
more than 32 bits. Because the < labelpattern
don't cares, it is handled as a string of characters rather than a number.
The OPATtem query, in pattern marker mode, returns the pattern
specification for a given label name. In the time marker mode, the query
returns the pattern under the 0 marker for a given label. If the 0 marker
is not placed on valid data, don't cares (XX...X) are returned.
Command Syntax:
where:
< l a b e l - n a m e >
:: = string of up to 6 alphanumeric characters
:: = "{#B{Oj 1 IX} . . . 1
OUTPUT XXX: ":MACHINEl:TWAVEFORM:OPATTERN
Example:
<label-name > , c label-pattern >
. . I
. . I
. . }"
command/query
Advertisement
Table of Contents
