To Connect The Analysis Probe To The Probe Adapter - HP 16600A Series User Manual

Chapter 3: Connecting and Configuring the Analysis Probe
Connecting the Analysis Probe to the Target System
To connect the analysis probe to the probe
adapter
The orientation of the analysis probe with respect to the probe adapter
depends on the orientation of the probe adapter with respect to pin 1
of the target system. Use the appropriate illustration from the following
pages to ensure you have the proper orientation. To connect the
analysis probe to the probe adapter:
Verify that there are no bent pins on the PGA socket of the transition
board.
Note the color (or number of black squares) on the side of the probe
adapter or flexible cable that is connected to the pin 1 side of the target
system microcontroller. Orient the analysis probe so that the solid
white side of the transition board aligns with the same color (or
number of black squares) on the PGA end of the probe adapter or
flexible cable.
CAUTION: Serious damage to the target system or analysis probe can result from
incorrect connection. Note the position of pin 1 (or pin A1) on the target
system, transition board, and the analysis probe prior to making any
connection. Also, take care to align the analysis probe connector with the pins
on the probe adapter assembly so that all pins are making contact.
Once all pins are aligned correctly, firmly press the analysis probe/
transition board onto the PGA socket of the probe adapter or flexible
cable.
44 Solutions for CPU32