Hot-Plug Components; Hot-Plug Power Supply Units - Fujitsu PRIMERGY TX300 S4 Operating Manual

8

Hot-plug components

This chapter describes how to handle the hot-plug components and/or how to
modify your server hardware (e.g. installing/removing hot-plug power supply
units or hot-plug HDD modules).
I
Upgrades, updates and replacement of non-hot-pluggable components
are described in the "Options Guide" or in the service supplement and
may only be performed by authorized specialist personnel.
The hot-plug procedure increases the availability of system operation and
guarantees a high degree of data integrity and failsafe performance.
V
CAUTION!
Follow the safety instructions in the chapter
page 25.
8.1

Hot-plug power supply units

I
A redundant power supply can be created by installing a second hot-
pluggable power supply unit (optional). If one power supply unit fails, the
other unit ensures operation can continue uninterrupted. The defective
power supply unit can be replaced online.
TX300 S4
Operating manual
"Important information" on
95