Fujitsu PRIMERGY TX300 S4 Operating Manual page 47

Hardware installation
– The shape of the rack support uprights must ensure that the rails can be
bolted to the front.
– Telescopic rails screwed to the front.
The rails have a linear alignment feature to ensure that they can be adjusted
to different rack depths (710 - 785 mm).
– No support of the cable management.
– Climatic conditions:
An unobstructed air intake in the rack front and air discharge in the rear
cover of the rack are essential for ventilation of the installed server.
In principle the ventilation concept envisages that the necessary cooling is
achieved by the horizontal self-ventilation of the installed devices (air flow
from the front to the rear).
– Power supply:
For installation in 3rd party racks, you must ensure that the appropriate
socket strips are present.
TX300 S4
Installing/removing the rack model
Operating manual 47