Connecting Devices To The Server - Fujitsu PRIMERGY TX300 S4 Operating Manual

Connecting devices to the server

4.4 Connecting devices to the server
The ports for external devices are on the rear of the server. The additional ports
available on your server depend on the expansion cards installed.
The standard ports (figure 19) are marked with symbols, and some are colour-
coded.
1
Figure 19: Connector panel on the back (floorstand and rack models)
1 Parallel port (optional)
2 PS/2 mouse port
3 Service LAN port
4 LAN port 2
5 LAN port 1
6 USB port 3
* The serial interface COM1 can be used as the standard interface or for
communication with iRMC.
64
2
11 10 9
7
8
9
10 Serial port COM1 *
11 PS/2 keyboard port
Operating manual
Hardware installation
3 4
8 7 6 5
USB port 4
Monitor port
Serial port COM2
TX300 S4