Fujitsu PRIMERGY TX300 S4 Operating Manual page 55

Hardware installation
Routing the fiber channel fiber optic cable
The protective hose (length approx. 1 m) supplied with the mounting kit has a
separable design.
Figure 10: Fitting the protective hose
Ê Separate the outer protective sheath (1) from the inner sheath.
Ê Carefully place the fiber optic cable (3) in the inner protective sheath (2).
Ê Push the outer protective sheath (1) over the inner protective sheath.
V
CAUTION!
The sheath openings must be arranged in an opposing direction as
shown in the sectional view A-B.
TX300 S4
Installing/removing the rack model
Operating manual 55