Hdd Module And Dummy Module - Fujitsu PRIMERGY TX300 S4 Operating Manual

Hot-plug hard disk drives
8.2.1

HDD module and dummy module

The hard disk drives which can be ordered for the PRIMERGY TX300 S4 are
supplied already mounted in an installation frame so that defective hard disk
drives can be replaced and new drives can be added during operation. The hard
disk drive and installation frame together make up the HDD module.
1
Figure 29: 3.5-inch HDD module and dummy module
1 HDD module (installation frame with hard disk drive installed)
2 Indicators
HDD Busy (LED green)
HDD Fault (LED orange)
For description see section
page 75.
3 Handle for locking and unlocking the HDD module
4 Button for locking and unlocking the handle
5 Ridge for the application of a sticker with the current drive name
6 Dummy module
7 Tabs for unlocking the dummy module
98
2 3 4 5
"Hard disk drive control indicators" on
Operating manual
Hot-plug components
4
6 7
TX300 S4