Fujitsu PRIMERGY TX300 S4 Operating Manual page 42

Installing the floorstand model
Ê Install the server.
V
CAUTION!
– The device must be protected from direct sunlight.
– Ensure that there is enough unobstructed area around the server
for operating and servicing the device (see
the floorstand model" on page
– Access to the rear of the server must be assured so that other
devices (e.g. memory subsystems) can be connected.
– The mains plug must be accessible easily and safely.
– A clearance of at least 200 mm must be maintained in front of and
behind the system to ensure proper ventilation.
Ê Wire the server. Please take note of the
server" on page 64
cables" on page
Ê Connect the system to the line voltage (see
to the mains" on page
42
and the section "Notes on connecting/disconnecting
67.
66).
Operating manual
Hardware installation
"Maintenance area for
22).
section "Connecting devices to the
section "Connecting the server
TX300 S4