Fujitsu PRIMERGY TX300 S4 Operating Manual page 52

Installing/removing the rack model
Figure 7: Mounting the telescopic rail in the Classic Rack
Ê Secure the right and left adapters to the support uprights in the rack with two
(M5) screws each.
Note that the guide nubs on the telescopic rails must fit into the holes in the
support uprights next to the spring nuts.
Ê Secure the left and right telescopic rails to the adapters in the rack with two
(M5) screws and nuts each.
I
If you do not have enough room, slide the neighboring server
forwards (see also the installation instructions for the conversion kit).
Ê Insert the server (see section
52
"Inserting the server" on page
Operating manual
Hardware installation
58).
TX300 S4