Table of Contents
Advertisement
5.
DTP/HDBT Status
receiver connected to the DTP/HDBT output is an Extron DTP receiver or an HDBase T
enabled receiver.
6.
Select a radio button from the
current input, or always encrypt the output.
Choices are:
•
Follow Input
source (default).
•
Always Encrypt Output
regardless of the HDCP status of the input source.
•
Follow Input (with continuous DVI trials)
output but encrypts the output only when required by the input source. Use
this setting when DVI sink devices initially pass HDCP encrypted content, but
intermittently display a green HDCP notification screen after a power cycle or
resuming from sleep mode.
•
Always Encrypt Output (with continuous DVI trials)
authenticates and encrypts the output, with continuous HDMI and DVI
authentication.
EDID Minder Menu
EDID Minder is an EDID management process that manages the resolution and refresh rate
between the switcher and one or more HDMI input sources and the output sink. EDID can
be set to match output rate, a custom user-defined EDID, or a factory setting (see
table
on page 27 for EDID data).
Click the
EDID Minder
EDID Minder
Figure 22.
Filtering Available EDID
Use the
Filter
Connected Outputs
figure
21,
(see
5
HDCP Mode
— Encrypts the output only when required by the selected input
— Always authenticates and encrypts the output,
icon (see figure 22,
menu.
1
2
3
4
5
EDID Minder Menu
tab (
) to limit the number of available EDID displayed in the
2
, and
Available EDID
DTP T SW4 HD 4K • Product Configuration Software (PCS)
on the previous page) indicates whether the
(
) to set the switcher to either follow the
6
— Always authenticates the
— Always
) on the global navigation bar to open the
1
6
9
panels.
EDID
7
8
,
Favorites
32
Advertisement
Table of Contents
