Control Processor Configuration for Contact/Tally Modes
When the DTP T SW4 HD 4K PLUS is connected to a Pro Series control processor to
control and monitor peripheral devices, the control processor must be configured using
Global Configurator Professional and Global Configurator Plus (GCP).
See figure 12 for typical configurations to Power OFF and Power ON using GCP:
Figure 12.
Typical Global Configurator Professional and Plus Configuration
For detailed information to configure the Pro Series control processors using
Global Configurator Professional and Global Configurator Plus, see the Global Configurator
Help File.
DTP T SW4 HD 4K • Operation
23