Features - Extron electronics DTP T SW4 HD 4K User Manual

Features

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Transmits HDMI plus control up to 330 feet (100 meters) over a shielded CATx
cable — The DTP T SW4 HD 4K provides high reliability and maximum performance on
an economical and easily installed cable infrastructure.
Switches HDMI video and embedded multi‑channel digital audio
Inputs: 4 female HDMI type‑A connectors — Allows for switching between four
video sources.
Output: 1 female DTP 330 twisted pair output on RJ‑45
Auto‑switching between inputs — Auto-switching allows for simple, unmanaged
installation in locations such as in a lectern or under a conference table
Supports computer and video resolutions up to 4K, including 1080p/60 Deep
Color — Resolutions up to 4096x2160 @ 30 Hz with 4:4:4 chroma sampling at 8 bits of
color.
Remote power — For simplified installation, the transmitter can supply power to a DTP
receiver over the twisted pair connection.
Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for
optimal performance
Compatible with CATx shielded twisted pair cable — Shielded twisted pair cabling
with solid center conductor sizes of 24 AWG or better is recommended for optimal
performance.
Supported HDMI specification features include data rates up to 10.2 Gbps,
Deep Color up to 12 bit, 3D, and HD lossless audio formats
DTP output is compatible with HDBaseT‑enabled devices — The DTP output can
be configured to send video and embedded audio, plus bidirectional RS-232 and IR
signals, to an HDBaseT-enabled display.
Supports multiple embedded audio formats — The DTP T SW4 HD 4K is
compatible with a broad range of multi-channel audio signals, providing reliable
operation with HDMI sources.
Bidirectional RS‑232 and IR pass‑through for AV device control — Bidirectional
RS-232 control and IR signals can be transmitted alongside the video signal, allowing
remote AV devices to be controlled without the need for additional cabling.
HDCP compliant — Fully supports HDCP-encrypted sources, with selectable
authorization for unencrypted content.
User‑selectable HDCP authorization — Allows individual inputs to appear HDCP
compliant or non HDCP compliant to the connected source, which is beneficial if the
source automatically encrypts all content when connected to an HDCP-compliant
device. Protected media is not passed in non HDCP mode.
EDID Minder automatically manages EDID communication between connected
devices — EDID Minder ensures that all sources power up properly and reliably output
content for display.
Automatic input cable equalization up to 50 feet when used with Extron
HDMI Pro cable — Actively conditions incoming HDMI signals to compensate for
signal loss when using long HDMI cables, low quality HDMI cables, and source devices
with poor HDMI signal output.
HDCP authentication and signal presence confirmation — Provides real-time
verification of HDCP status for each digital video input. This allows for simple, quick, and
easy signal and HDCP verification through front panel LEDs, RS-232, or USB, providing
valuable feedback to a system operator or helpdesk support staff.
DTP T SW4 HD 4K • Introduction 2