Table of Contents
Advertisement
9.
Click
Update Firmware to this Device...
Figure 29.
Update Firmware to this Device
The
Update Firmware
Figure 30.
Update Firmware Window
10.
Click
(see figure 30,
Continue
11.
Click
Open Firmware File...
been downloaded on your PC. Valid firmware files have a .S19 file extension.
ATTENTION:
•
Valid firmware files must have the file extension S19. A file with any other
extension is not a firmware upgrade for this product and could cause the
switcher to stop functioning.
•
Les fichiers firmware valides doivent contenir l'extension fichier S19. Un fichier
avec n'importe quelle autre extension n'est pas une mise à jour de firmware
pour cet appareil et l'appareil pourrait arrêter de fonctionner.
12.
Click
or double click to select the firmware file.
Open
13.
Click
on the
Update
Update Firmware dialog box
new firmware onto your connected device. The Installing Firmware progress field
shows the progress of the upload. After the upload is complete, a dialogue box opens
confirming that the upload is complete.
14.
Click
. The software returns to the
Close
15.
Select your device from the
re-established with the device before continuing to use the software.
16.
Click
, or double click on the device. The device reconnects to the software.
Connect
NOTE: The original factory-installed firmware is permanently available on the
DTP T SW4 HD 4K. If the attempted firmware upload fails for any reason, the
switcher reverts to the factory version.
window opens.
1
).
1
to navigate to the device-specific firmware file that has
Device Discovery
menu in
Device Discovery
DTP T SW4 HD 4K • Product Configuration Software (PCS)
. This uploads and verifies the
window.
. A connection must be
PCS
39
Advertisement
Table of Contents
