Seam Program Input - Pfaff 3801-3/07 Instruction Manual

Input
11

Seam program input

.01
Seam programs can be created by entering parameters in the "Creating/adjusting a seam
program" function, or by sewing a sample with the "Teach in" function.
Irrespective of which function is being used, first of all it is necessary to select the program
number and the basic settings of the seam program, which is to be sewn.
11 Basic settings for seam program input
.01.01
In the "Creating/adjusting a program" and "Teach-in" functions the basic settings are the
same and consist of basic size and seam type.
● Switch on the machine.
● Select a number from 3 – 49, see Chapter 9.07 Selecting a program number.
● Call up the input mode.
● Call up the "Creating/adjusting a seam program" or the "Teach in" function.
● If necessary, change the selected program number and confirm the selection.
● Choose a basic size.
11 - 2
5 5