Table of Contents
Advertisement
Input
11
Input
In this chapter the input of seam programs is described.
11
Seam program input
.01
After selecting programmed sewing, seam programs can be entered. The input is carried out
by switching functions on or off or by entering values for the seam section of a seam pro-
gram. All functions available in programmed sewing can be used for the seam program input,
see Chapter 10.02 Programmed sewing.
The seam program input is described in the following example.
11
Example of a seam program input
.02
A seam program consists of the program number and at least one seam section with
allocated functions. Below is an example of a seam program input for a spade pocket.
11 - 1
Switch on the machine.
Press the PM key to call up programmed sewing.
The text "PM" must appear on the display.
Seam section 7
Seam
section 8
Seam
section 6
Seam section 5
PM
15
0
2.0
Program numner: 7
Stitch length: 2.0 mm
Seam depth: 0.8 mm
Seam section 2
Seam
section 1
Seam
section 3
Seam section 4
Advertisement
Table of Contents
