Pfaff 3801-3/07 Instruction Manual page 40

Sewing
Seam end (only on machines with tape feed device - 3801-11/071)
Opens the menu for entering the seam parameters at the end of the seam
(pedal position "-2"), see Chapter 9.10 Entering the seam parameters
Needle raised
Moves the needle to its highest position
Tape feed (only on machines with tape feed device - 3801-11/071)
Switches the tape feed device on or off.
Feed tape (only on machines with tape feed device - 3801-11/071)
When the tape feed device is switched on, this function feeds the tape (threading aid), see
Chapter 9.04 Threading the bridle tape.
Needle position raised
When this function is activated, the needle moves to its highest position after sewing stops.
Thread trimming
When activated, this function enables thread trimming with the pedal function.
Sewing foot raised
When this function is activated, the sewing foot is raised after sewing stops.
Sewing foot lowered after thread trimming
When this function is activated, the sewing foot is not raised after thread trimming.
● Sewing is carried out with the pedal functions, see Chapter 7.02 Pedal.
10 - 2