Adjusting The Thread Trimmer; Only On The Pfaff 3801-3/071 And -11/071; Preadjusting The Thread Catcher - Pfaff 3801-3/07 Instruction Manual

13

Adjusting the thread trimmer

.06

Only on the PFAFF 3801-3/071 and -11/071.

13

Preadjusting the thread catcher

.06.01
Requirement
1. The point of the thread catcher 4 must be at a distance of 32.5 - 33 mm to the front
edge of the mounting plate 1.
2. The guides 5 must be parallel to the mounting plate 1.
3. The thread catcher 4 must move freely and with minimal play.
4
6
Fig. 13 - 33
● Remove mounting plate 1 (screws 2).
● Loosen screws 3.
● Move thread catcher 4 according to requirement 1.
● Align guides 5 according to requirements 2 and 3, and tighten screws 3.
● Screw on mounting plate 1, ensuring that the ball pin 6 engages in the drive dog of the
thread catcher 4.
1
2
5
3
1
Adjustment
3
4
5
3
13 - 36