Adjustment
13
Ball pin position
.06.02
● Position the ball pin 1 vertically.
● Move carrier 2 (screws 3) according to requirement 1.
● Turn ball pin 1 (nut 4) according to requirement 2.
13 - 37
Requirement
When it is positioned vertically, the ball pin 1 must
1. be centered with respect to the drive dog 5, and
2. have a distance of 0.5 mm to the bottom of the drive dog 5.
5
1
Fig. 13 - 34
2
5
1
4
3