Seam Program Input Via The "Create/Correct Program" Function; Examples Of Seam Program Input Using The "Create/Correct Program" Function - Pfaff 1571 Instruction Manual

11

Seam program input via the "Create/correct program" function

.01
This function is used to enter the seam program by entering or changing the corresponding val-
ues on the control panel. This type of seam program input is particularly suitable for correcting
already existing seam programs.
11

Examples of seam program input using the "Create/correct program" function

.01.01
The seam to be programmed should
- contain 3 seam zones
- and be saved under program number 10
 Switch the machine on.
 Call up input mode.
 Call up the "Create/correct seam program" function.
 Enter the template code, see chapter 9.10 Entering/changing the template code.
 Adopt the code number entered.
The programming examples shown in the display are only as follows, when no
seam program has been entered under the selected program number.
Input
61