In the first seam section
-
the number of stitches should be "20" and
-
the seam should be sewn with a graduated value of "2" without fullness.
The values for the placement stitch and the maximum speed remain unchanged.
● Enter the value "0" for the fullness.
● Enter the value "20" for the number of stitches.
● Enter graduated value "2".
● Change to the input of the second seam section.
In the second seam section
-
the number of stitches should be "10" and
-
the seam should be sewn without a graduated value and with a fullness value of "30".
The value for the maximum speed is taken over unchanged from the first seam section.
● Enter the value "30" for the fullness.
● Enter the value "10" for the number of stitches.
● Enter graduated value "0".
Input
11 - 9