Adjustment
13
Zero position of feeding presser
.05.09
● Set feed regulator at " 0 ".
● Undo screw 1 just enough to allow crank 2 to be turned.
● Turn the balance wheel continuously and turn crank 2 to the posit-ion in which lever 3 no
● Fully tighten screw 1.
13 - 11
Requirement
With the stitch length set at " 0 " and adjustment gauge 4 in place the feeding presser must
not make any movement.
2
4
54-033
Fig. 13 - 09
longer moves.
1
3