12
Care and Maintenance
Clean looper compartment .................................. daily, several times if in continuous use
Clean the entire machine ............................................................................... once a week
Check the oil level .................................................................................... daily, before use
Lubricate the articulated joints of the top feed ............................................... once a week
Check/adjust the air pressure ................................................................... daily, before use
Clean air filter of air filter/regulator .................................................................... as required
12
Cleaning
.01
Fig. 12 - 01
These maintenance intervals are calculated for the average running time of a sin-
gle shift operation. If the machine is operated for a longer period, shorter intervals
are recommended.
1
Care and Maintenance
Switch the machine off!
Danger of injury if the machine
is started accidentally!
● Tilt sewing head back.
● Clean looper and looper compartment
daily, several times if in continuous
operation.
● When returning the machine to an upright
position, make sure that tilt lock 1 is
pressed.
Use both hands to set the
sewing head upright!
Danger of crushing between the
sewing head and the table top!
12 - 1