Sewing; Manual Sewing - Pfaff 3801-3/07 Instruction Manual

10

Sewing

In the sewing mode all relevant settings for the sewing operation are displayed on the
screen and can be altered with the corresponding functions.
In the sewing mode a difference is made between manual sewing, sewing with fixed
programs and programmed sewing.
The selection is made with the corresponding program number:
1 and 2:
3 to 49:
10

Manual sewing

.01
In the manual sewing mode the values for fullness and the stitch placement position are
shown on the display when sewing starts, and like the needle and sewing foot positions, can
be changed directly with the appropriate function. On machines with the tape feed device
(3801-11/071) the function can also be changed at the end of the seam.
● Switch on the machine and select program number "0", see Chapter 9.07 Selecting the
program number.
Explanation of the functions
Program selection
This opens the menu for entering the program number, see Chapter 9.07 Selecting the
program number.
Input mode
Exit the sewing mode and select the input mode.
Fullness
Alters the value for fullness, see Chapter 9.08 Inputting fullness
Seam start (placement stitch)
Opens the menu for entering the placement stitch value.
0: Manual sewing
Sewing with fixed programs
Programmed sewing
(with up to 15 seam sections for both the left and right seam)
Sewing
10 - 1