13
Front driving link of feeding-presser drive
.05.10
Requirement
With the needle bar at 0.8 mm before t.d.c. (hole 4) there must be a distance of 16.5 mm
between the eye of link 2 and machine housing 3.
1
3
Fig. 13 - 10
● Set needle bar at 0.8 mm before t.d.c.
● Loosen screw 1.
● Adjust link 2 according to Requirement.
● Tighten screw 1.
● Check adjustment.
16,5 mm
2
2
Adjustment
13 - 12