Adjustment
13
Fastening the light guides
.07.04
The light guides 1 are led into the corresponding holes on the Tape feeding device and
clamped with bolts 2, see magnified illustration A.
To release the clamping, the bolts 2 must be turned by 90º, see magnified illustration B.
13 - 45
A
2
1
Fig. 13 - 42
For cutting or shortening the light guides 1, we recommend the use of a suitable
knife (part no. 99-137 071-91).
2
1
1
B
2
1
2
1
2
1