Using The Probe - Fluke OF-500-10 Technical Reference Handbook

OF-500 OptiFiber Certifying OTDR
Technical Reference Handbook

Using the Probe

Figure 5-1 shows the equipment required for
FiberInspector tests. Figure 5-2 shows how to use the
probe.
1 Use the adapter cable provided to connect the probe
to the video input jack on the side of the tester.
A
OptiFiber tester
B
Memory card (optional)
C
Spare battery pack (optional)
D
AC adapter with line cord (optional)
5-2
E
F
Figure 5-1. Equipment for FiberInspector Tests
2 Screw an adapter tip that matches the connector type
being inspected onto the fiber probe.
3 Clean the connector to be inspected.
f
4 Press . If the message "Camera Image
Unavailable" appears check the connections between
the probe and the tester.
FiberInspector probe with adapter cable and
appropriate adapter tip
Fiber cleaning supplies
ajt43f.eps