Upload Configuration; Upload Configuration To Tftp; Upload Configuration To Ftp - D-Link xStack DES-3200 Series Reference Manual

Upload Configuration

The following window is used to upload the configuration file from the Switch.

Upload Configuration To TFTP

This window is used to upload the configuration file from the Switch to a TFTP Server.
The fields that can be configured are described below:
Parameter
TFTP Server IP
Destination File
Source File
Filter
Click Upload to initiate the upload.

Upload Configuration To FTP

This window is used to upload the configuration file from the Switch to a FTP Server.
xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
Figure 12-12 Upload Configuration – TFTP window
Description
Enter the TFTP server IP address used.
IPv4
Enter the file name that will be stored in the TFTP server, e.g. config.cfg.
Enter the location of the Source File, e.g. C:/config.cfg.
Use the drop-down menu to include, begin or exclude a filter like SNMP, VLAN or STP.
Select the appropriate Filter action and enter the service name in the space provided.
Figure 12-13 Upload Configuration – FTP window
Click the radio button to enter the TFTP server IP address used.
276