D-Link xStack DES-3200 Series Reference Manual page 29

To view this window, click System Configuration > Command Logging Settings, as shown below:
The fields that can be configured are described below:
Parameter
Command Logging State
Click the Apply button to accept the changes made.
NOTE: When the switch is under the booting procedure, all configuration commands will not be
logged. When the user uses AAA authentication to logged in, the user name should not be
changed if the user has used the Enable Admin function to replace its privilege.
xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
Figure 2-19 Command Logging Settings window
Description
Use the radio buttons to enable or disable the function.
21