Lldp - D-Link xStack DES-3200 Series Reference Manual

Operational East Port
Admin RPL Port
Operational RPL Port
Admin RPL Owner
Operational RPL
Owner
Protected VLAN(s)
Ring MEL (0-7)
Holdoff Time (0-10000)
Guard Time (10-20000)
WTR Time (5-12)
Revertive
Current Ring State
Click the Apply button to accept the changes made.
Click the <<Back button to return to the previous window.
After clicking the Sub-Ring Information
The fields that can be configured are described below:
Parameter
Sub-Ring R-APS VLAN
State
TC Propagation State
Click the Apply button to accept the changes made.
Click the <<Back button to return to the previous window.

LLDP

LLDP
xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
Display the operational east port value.
Specify the RPL port used. Options to choose from are West Port, East Port, and
None.
Display the operational RPL port value.
Specify to enable or disable the RPL owner node.
Display the operational RPL owner value.
Specify to add or delete the protected VLAN group.
Specify the ring MEL of the R-APS function. The default ring MEL is 1.
Specify the hold-off time of the R-APS function. The default hold-off time is 0
milliseconds.
Specify the guard time of the R-APS function. The default guard time is 500
milliseconds.
Specify the WTR time of the R-APS function.
Specify the state of the R-APS revertive option.
Display the current Ring state.
link, the following window will appear:
Figure 4-76 ERPS Sub-Ring Settings window
Description
Enter the Sub-Ring R-APS VLAN ID used here.
Specify the ERPS Sub-Ring state here. Options to choose from are Add and
Delete.
Specify the TC Propagation state here. Options to choose from are Enabled and
Disabled.
109