Lldp Management Address List - D-Link xStack DES-3200 Series Reference Manual

The fields that can be configured are described below:
Parameter
From Port / To Port
Notification
Admin Status
Subtype
Action
Address
Click the Apply button to accept the changes made.
NOTE: The IPv4 or IPv6 address entered here should be an existing LLDP management IP address.

LLDP Management Address List

On this page the user can view the LLDP management address list.
xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
Figure 4-78 LLDP Port Settings window
Description
Use the drop-down menu to select the ports used for this configuration.
Use the drop-down menu to enable or disable the status of the LLDP notification. This
function controls the SNMP trap however it cannot implement traps on SNMP when the
notification is disabled.
This function controls the local LLDP agent and allows it to send and receive LLDP
frames on the ports. This option contains TX, RX, TX And RX or Disabled.
TX - the local LLDP agent can only transmit LLDP frames.
RX - the local LLDP agent can only receive LLDP frames.
TX And RX - the local LLDP agent can both transmit and receive LLDP frames.
Disabled - the local LLDP agent can neither transmit nor receive LLDP frames.
The default value is TX And RX.
Use the drop-down menu to select the type of the IP address information will be sent.
Use the drop-down menu to enable or disable the action field.
Enter the IP address that will be sent.
111