Radius Authentication - D-Link xStack DES-3200 Series Reference Manual

The fields that can be configured are described below:
Parameter
Network
Shell
System
Click the Apply button to accept the changes made.

RADIUS Authentication

Users can display information concerning the activity of the RADIUS authentication client on the client side of the
RADIUS authentication protocol.
To view this window, click Security > RADIUS > RADIUS Authentication as shown below:
xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
Figure 8-23 RADIUS Accounting Settings window
Description
When enabled, the Switch will send informational packets to a remote RADIUS server
when 802.1X port access control events occur on the Switch.
When enabled, the Switch will send informational packets to a remote RADIUS server
when a user either logs in, logs out or times out on the Switch, using the console, Telnet,
or SSH.
When enabled, the Switch will send informational packets to a remote RADIUS server
when system events occur on the Switch, such as a system reset or system boot.
185