D-Link xStack DES-3200 Series Reference Manual page 296

Layer 2 managed fast
Hide thumbs Also See for xStack DES-3200 Series:
Table of Contents

Advertisement

with static FDB
Dynamic IMPB entry conflicts
with static IMPB
Creating IMPB entry failed due to
no ACL rule available
IP and Password
IP Address change activity
Changed
Password change activity
Safeguard Engine is in normal
Safeguard Engine
mode
Safeguard Engine is in filtering
packet mode
Packet Storm
Broadcast strom occurrence
Broadcast storm cleared
Multicast storm occurrence
Multicast storm cleared
Port shut down due to a packet
storm
Loop Back
Port loop occurred
Dection
Port loop detection restarted
after interval time
Port with VID loop occurred
Port with VID Loop detection
restarted after interval time
VID assigned from radius server
after radius client authenticated
by radius server
802.1x
successfully .This VID will assign
to the port and this port will be
the vlan untag port member.
Ingress bandwidth assigned from
radius server after radius client
authenticated by radius server
successfully .This Ingress
bandwidth will assign to the port.
Egress bandwidth assigned from
radius server after radius client
authenticated by radius server
successfully .This egress
bandwidth will assign to the port.
802.1p default priority assigned
from radius server after radius
client authenticated by radius
server successfully.This 802.1p
default priority will assign to the
port.
802.1x Authentication failure
802.1x Authentication success
CFM
Cross-connect is detected
xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
<ipaddr>, MAC: <macaddr>, Port <portNum>)
Dynamic IMPB entry conflicts with static IMPB(IP:
<ipaddr>, MAC: <macaddr>, Port <portNum>)
Creating IMPB entry failed due to no ACL rule being
available(IP:<ipaddr>, MAC: <macaddr>, Port
<portNum>)
Management IP address was changed by (Username:
<username>,IP:<ipaddr>)
Password was changed by (Username:
<username>,IP:<ipaddr> )
Safeguard Engine enters NORMAL mode
Safeguard Engine enters EXHAUSTED mode
Port <portNum> Broadcast storm is occurring
Port <portNum> Broadcast storm has cleared
Port <portNum> Multicast storm is occurring
Port <portNum> Multicast storm has cleared
Port <portNum> is currently shut down due to a packet
storm
Port <portNum> LBD loop occurred. Port blocked.
Port <portNum> LBD port recovered. Loop detection
restarted.
Port <portNum> VID <vlanID> LBD loop occurred.
Packet discard begun.
Port <portNum> VID <vlanID> LBD recovered. Loop
detection restarted.
Radius server <ipaddr> assigned vid :<vlanID> to port
<portNum> (account :<username> )
Radius server <ipaddr> assigned ingress
bandwith :<ingressBandwidth> to port <portNum>
(account : <username>)
Radius server <ipaddr> assigned egress
bandwith :<egressBandwidth> to port <portNum>
(account: <username>)
Radius server <ipaddr> assigned 802.1p deafult
priority:<priority> to port <portNum> (account :
<username>)
802.1x Authentication failure from (Username:
<username>, Port: <portNum>, MAC: <macaddr> )
802.1x Authentication success [for <reason> ] from
(Username: <username>, Port: <portNum>, MAC:
<macaddr>)
CFM cross-connect. VLAN:<vlanid>, Local(MD
288
Warning
Warning
Informational
Informational
Informational
Warning
Warning
Informational
Warning
Informational
Warning
Critical
Informational
Critical
Informational
Informational
Informational
Informational
Informational
Warning
Informational
Critical

Advertisement

Table of Contents
loading

Table of Contents