Table of Contents
Advertisement
Value IP 2MP 288 Series / 3MP 368 Series
7.1.1.2. Multicast Settings
Enable if required, fill in the setting options for main stream / sub stream video and audio. For
more details, please refer to Appendix B. Enabling the Multicast Function.
Enable Multicast: Check the box to enable the Multicast function.
IP Address: Fill in the multicast IP address. IP addresses in the range of 224.0.0.0 through
239.255.255.255 are reserved for multicasting. For devices, you can use 225.x.x.x - 232.x.x.x and
234.x.x.x - 238.x.x.x. Click
here
for more details.
Port: Change the port number if necessary.
TTL: Input a Time-To-Live (TTL) value. The TTL value specifies the number of routers (hops) that
multicast traffic is permitted to pass through before expiring on the network.
After complete the settings, click Save to apply the changes.
34
Advertisement
Table of Contents
