Restore - EverFocus EBN288/368 User Manual

Value IP 2MP 288 Series / 3MP 368 Series
 One Time: The IP camera will reboot at the specified time (YYYY/MM/DD hh:mm:ss).
After complete the settings, click Save to apply the changes.

7.1.5.3. Restore

Save Config: To make a backup file of the machine's current configurations, click this button to
export all the configurations to a configuration file. This will enable the user to reload these
configuration settings if the settings are changed and there is unexpected behavior.
Load Config: Click to import a previously prepared configuration file and then apply the
parameters from the configuration file to the system.
Restore: This button should be used with caution. Clicking this button will return the selected
camera settings to the factory default values.
Reboot: Click to reboot the IP camera without changing any of the settings. Use this function if
the IP camera is not behaving as expected.
42