Table of Contents
Advertisement
NTP Port: Enter the Network Time Protocol port. The default port number is 123.
Interval for Time Sync: Input the interval time for automatic time synchronization with NTP.
Select Time Zone: Select the time zone of the camera's location.
GMT: Check the Adjust box to enable adjusting the offset and set the desired minute in the
min field.
After complete the settings, click Save to apply the changes.
7.1.3. Storage
You can check the SD Card utility or format the SD Card using this page.
If a micro SD card has been inserted to the micro SD card slot of the camera, the micro SD card
information will be displayed in this field, such as capacity, available free space and record status.
To format the card, click the Format button and all data saved on the micro SD card will be removed
(see 4.4.2 Inserting a Micro SD Card).
Note:
1. The Storage function is only available for EDN288/368M, EZN288/368 and EZN288/368M.
2. Before you insert or remove the SD card, please turn off the IP camera first.
Value IP 2MP 288 Series / 3MP 368 Series
38
Advertisement
Table of Contents
