Memory Pen - Samson TROVIS 5433 Mounting And Operating Instructions

9

Memory pen

A memory pen (accessories; order no. 1400-7697) is particularly useful to transfer all data
from one TROVIS 5433 Controller to several other TROVIS 5433 Controllers. The memory
pen is plugged into the connector integrated into the front panel. Once the pen has been
connected, "33 SP" is displayed. If the memory pen already contains data from a different
TROVIS 5433 controller, turn the rotary pushbutton until "SP 33" is displayed.
4
Pressing the rotary pushbutton to confirm "33 SP" causes the controller settings to be
transferred to the memory pen.
4
Pressing the rotary pushbutton to confirm "SP 33" causes the saved controller settings to
be transferred from the memory pen to the controller.
During the data transfer, the bars on the display indicate the progress of the transfer. When
the bars have stopped indicating the transfer progress, the connection between controller
and memory pen can be terminated.
A database module for the use of the TROVIS 5433 Controller together with the
TROVIS-VIEW 6661 software is available (accessories; order no. 6661-1003). The memory
pen needs to be connected to the PC over a serial interface adapter (accessories; order no.
1400-7700). In addition, a complete hardware package (including 1 memory pen, 1 serial
interface adapter and 1 connecting cable for direct connection between controller and PC) is
available as an accessory (order no. 1400-7704).
Using TROVIS-VIEW, it is possible to adjust all controller settings in a convenient user inter-
face and transfer them to a memory pen. In addition, data can be read from a memory pen
to change or print them.
Memory pen
71
EB 5433 EN