Presetting Temperature Set Points - Samson TROVIS 5433 Mounting And Operating Instructions

1.7

Presetting temperature set points

For the heating circuit, the desired room temperatures during the day ( Day set point ) and
during the night ( Night set point ) can be preset.
In the DHW circuit, the temperature you wish the domestic hot water to be heated to can be
adjusted.
The temperature set points are adjusted using the top rotary switch:
Desired temperature set point
Day set point
Night set point
DHW temperature set point
Parameters
Day set point
Night set point
DHW temperature set point
Proceed as follows:
Turn rotary switch "Configuration and parameterization" to "Set point temperature".
Display shows: temperature value
Activate editing mode for set point temperature.
Display blinks.
q
Edit set point temperature.
Confirm set point temperature.
Return rotary switch "Configuration and parameterization" to INFO.
Display shows: time
Position
WE Rotary switch / Range of values
20 °C 10 to 40 °C
15 °C 10 to 40 °C
55 °C Min. to max. DHW temperature
Operation
17
EB 5433 EN