Operation Using Memory Pen - Samson TROVIS 5757-3 Mounting And Operating Instructions

Operation
8.4 Operation using memory
pen
u EB 6661.
The memory pen can be loaded with data
configured in TROVIS-VIEW and the config-
uration data transferred to one or several
devices of the same type and version.
Additionally, the data from the device can
be written to the memory pen. This allows
the configuration data to be simply copied
from one device and loaded onto other de-
vices of the same type and version.
Blinking pattern of the yellow LED for the memory pen
− Command pen inserted
− Memory pen action completed
− Preparing to read data from memory
pen
− Preparing to write data to memory pen
8-4
Note
On inserting a memory pen that is empty or
that contains data from another type of de-
vice or another version of the same device
into the serial interface port of the actuator,
the data from the actuator are uploaded to
the memory pen regardless of the status of
the memory pen and any other data on the
memory pen will be overwritten.
On
Off
On
Off
On
Off
On
Off
Time in s
Time in s
Time in s
Time in s
EB 5757 EN