Load Settings; Remote Control - Teledyne T3AWG2152 Operator's Manual

Operator's Manual Simple AFG Application

Load Settings

Touching the "Load Settings" button in the "More" menu, a page will open showing the list of
all the saved memories. Selecting a memory entry the current instrument settings will be immediately
updated with those of the memory entry.
The buttons have the same functions they have in the "Save Settings" page.
Note: at the power on of the instrument the file "Memory0.afs", containing the last setting before the
power off, is used to update the current instrument settings.

Remote Control

The "Remote" button located in the Command Bar opens the page of the SCPI server. In that
page there is the list of all the commands received by the SCPI server and its replies. If the text of the
command is displayed in green it means that the command is correct and it has been accepted by the
server. If the text of the command is displayed in red it means that the command is wrong, and it hasn't
been accepted by the server.
51