Zoom Speed; Motion Det; Exit; Video Set Menu - EverFocus ED2250S/P Owner's Instructions Manual

ZOOM SPEED

In the ZOOM SPEED menu you can
select the speed of the ZOOM Key
(Tele/Wide).
Use the [Left] or [Right] keys in the
ZOOM SPEED menu to select
the speed.
1 : Magnification x 22 takes about 18 seconds. Slowest speed
2 : Magnification x 22 takes about 10 seconds. Low speed
3 : Magnification x 22 takes about 6 seconds. High speed
4 : Magnification x 22 takes about 4 seconds. Fastest speed

MOTION DET

In MOTION DET, you can set the Motion Detection function, Motion Detection
Sensitivity, and the Area of Motion Detection. If the Motion Detection function
is set, the movement of an intruder can be detected. When motion is detected,
it sets off the Alarm signal of the Controller.
(CAMERA SET)
➜
CAMERA ID OFF
V-SYNC INT
Press
COLOR/BW COLOR
ZOOM SPEED 3 [Enter]
MOTION DET ON...

EXIT

QUIT
If you select ON and press the [ENTER] key, the "MOTION DET" submenu
screen will come up.
The "AREA" menu, from which you can specify screen areas where the Motion
Detection function will be applied, can be set to either PRESET or USER. If
you set the "AREA" menu to PRESET, the Motion Detection function will be
applied to the areas preset as factory defaults.
If you set the AREA menu to USER and press the [ENTER] key, you can
choose from 48 areas where you want to apply the Motion Detection function.
Use the [5] key and [left, right, up, down] keys to move and select the motion
detection area.
Press the [5] key to assign an area or to cancel the area.
3-6
If you press [ENTER] once more, you will exit the "AREA" setting menu.Use
(CAMERA SET)
the "SENSITIVITY" menu to set the sensitivity of the MOTION Detection.The
CAMERA ID OFF
Higher it is set, the more sensitive the Motion Detection moves.
V-SYNC INT
COLOR/BW COLOR
ZOOM SPEED 3
MOTION DET OFF
EXIT QUIT
*Motion Detection function does not operate while handling slow SHUTTER, PRESET,
SCAN, AUTO MODE(AUTO PAN, PATTERN) or MANUAL KEY (JOYSTICK, ZOOM, FOCUS, IRIS).
EXIT
The EXIT menu is used to quit the CAMERA SET
(MOTION DET)
menu of the ED2250S/P and return to the MAIN
MENU.
- QUIT: Ignores the changed information and
AREA PRESET...
SENSITIVITY MEDIUM
- SAVE: Saves the information of the setting
RET
- PRESET: Ignores the changed information and

2. VIDEO SET MENU

IRIS

The video output level of the monitor can be controlled by the IRIS lens
depending on the level of the incoming light.The video output level can be
set in the ALC menu.The opening and shutting of the Iris lens can be set
manually in the MANU menu.
➜
Use the [Left, Right, Up, Down] Keys
Press the [5] key to assign an area
or to cancel the area.
(CAMERA SET)
CAMERA ID
V-SYNC
COLOR/BW
ZOOM SPEED
MOTION DET
restores the saved information.
EXIT
condition of the menu.
restores the initial factory defaults of
the menu.
E
OFF
INT
COLOR
3
OFF
QUIT
3-7