How To Upload Config-Uration Data From A Pc - Furuno VR-7000 Instruction Manual

4. HOW TO UPLOAD CONFIG-
URATION DATA FROM A PC
The procedure below shows how to upload configuration data from the PC to the
VR-7000.
1. Click the [Maintenance] menu.
2. Select [VDR Config Management] to open the dialog box shown below.
3. Click the [Import from] button.
4. The [Open] dialog box appears. Select configuration data, and then click the
[Open] button.
5. Click the [Upload] button to upload data to the VR-7000.
6. Click the [Write] button.
7. The message "VDR will be rebooted. Continue?" appears click the [OK] button to
continue. You are then logged out of the Maintenance Viewer. The reboot takes
several minutes.
4-1