Furuno VR-7000 Instruction Manual page 18

2. SOFTWARE CONFIGURATION
7. Select [PC_RAP] from the [Tool] menu.
Check the indications in the [Alert] window. When an alert is displayed, the
corresponding sensor data is not being received correctly. Solve the reason for
the error before going to the next step. Refer to the VDR Operator's Manual or
error code list for descriptions of individual error codes.
8. Click the [X] button at the top right corner to close the [PC_RAP].
9. From the menu, select [Maintenance] > [Equipment Management] > [Import].
10. Select the file "equipment.xml" from the desktop and click [Open].
Note: Do not select any other file, to prevent trouble.
11. From the menu, select [Maintenance] > [VDR Config Management] > [Download].
Click the [OK] button twice then the [Close] button.
12. Check the memory size of the DRUs and Long Term Device, which appears in the
respective [Size] field. If the memory size display shows "****MB" (data read error)
restart the VDR. If the display still does not change, check that the DRU and Long
Term Device are correctly connected.
Example of acceptable memory size displays:
32GB Fixed DRU
Size: 5794 MB or more
If the configuration file has already been downloaded, step 10 is not necessary. The
following description refers to setting individual tabs.
On most tabs there is an [Information] window on the left and a [Setting] window on
the right. Select the channel to set in the [Information] window by selecting it with the
cursor, and then set it in the [Setting] window. The results of the updated settings
appear in the [Information] window. After setting each channel, click [Set] to finish.
2-2
64GB Float DRU
Size: 8822 MB or more
512GB Long Term Device
Selected: SSD
Size: 37864 MB