Furuno VR-7000 Instruction Manual page 43

2. SOFTWARE CONFIGURATION
Description of the items in the Setting window
[Priority]: Display priority order.
[Date and Time Source/Ship Position Source]: Set the GPS source channel (serial
channel number for ZDA sentence)
[Check]: Enable or disable checking.
[GPS Antenna Position From Bow]: Enter the position of GPS antenna from bow.
[GPS Antenna Position From Stern]: Enter the position of GPS antenna from stern.
[GPS Antenna Position From Starboard]: Enter the position of GPS antenna from star-
board.
[GPS Antenna Position From Port]: Enter the position of GPS antenna from port.
[GPS Failure Threshold]: If the ZDA is input within the set time limit, the system restarts
synchronizing. If not input within the time limit, the system restarts without synchroniza-
tion.
[GPS Delay Time by Time Sync]: Enter the minimum time delay for time synchroniza-
tion.Time synchronization is started only in the time set here.
[GPS Difference Interval]: The time set here is added to the GPS time to synchronize
the system time. Leave at the default value of 0.
[GPS Sync Giveup Time]: If the system receives the GPS time within the time set, the
system synchronizes with the time. If the GPS time is not received, the "error 26" mes-
sage appears.
[ZDA Timeout]: Enter the value (seconds) for ZDA timeout (234 error) from GPS.
[Note]: Enter remarks. (Entry optional.)
[NTP Server]: Synchronize the time of a computer client or server to another server
or reference time source.
2-27